Call our Sales Team
01903 538 488
Mon - Fri 9am - 6pm

Squirrel Control Products

Squirrel Cage Traps

Tilt N Spin Bird Feeder Repeller

Ultrasonic Squirrel Repellers

Squirrel Proof Chimney Guards

Squirrel Proof Wire Mesh

Delivery Options

Orders placed before 3pm are normally shipped the same day.

Standard Delivery 3 - 5 Working Days	£4.99
Express Delivery Next Working Day	£8.99

Premium shipping charges apply for next day delivery to some areas of Scotland, Northern Ireland and Northumberland.

Please call for international delivery rates.

Click to enlarge

Tilt n Spin Squirrel Repeller (WM122)

An effective and welfare friendly way to prevent squirrels stealing from birdfeeders. The unit is specially calibrated to detect squirrel activity alone, remaining on passive stand-by whenever birds are on the feeder. The battery-powered unit is easy to set up and a safe and effective way to ensureit's the birds that get all the nuts!

How it Works

The Tilt 'n' Spin Repeller is set to detect the tilt caused by a squirrel's bodyweight and activate the battery powered motor for 10 seconds. As the feeded hanging below spins it throws the squirrel off without harm. Feeding birds will not activate the unit, even when several visit the feeder at once. Repeat activation soon trains even the most persistent squirrel to go elsewhere for food.

Power

Requires 3 X C-size, LR14 Alkaline Batteries (not included)

Contents

1X Tilt n Spin Squirrel Repeller

1 X Plastic hang hook

4 X Standard plastic ties

1 X Instruction leaflet

Setting Up

Remove all packaging and carefully read the instructions provided

Insert batteries bu DO NOT SWITCH ON.

To relocate the unit or change the batteries or to refill the feeder, the unit must always be switched OFF.

Fill the bird feeder and hang from the hook at the base of the unit

Turn on the unit. The LED light will flash for 10 seconds during which time the unit remains inactive.

Green flash: battery power good and unit will activate.

Red flash: battery power low and should be replaced.

After flashing grre the unit is primed. The LED will continue to flash every 5 second indicating that it is on stand-by.

On activation the unit will spin the birdfeeder for 10 seconds. Dependent on whether the unit is tilted or not, the LED will flash either green, or red-green during activation.

The unit will then stop for 5-seconds. This prevents self activation caused by movement of the birdfeeder. If the squirrel is still present, or visits the feeder again, the unit will re-activate.